Tabla de Contenidos
7.1. Mostrar rutas IPv6 existentes
Primero se debería verificar si hay direcciones IPv6 ya configuradas (quizás automágicamente durante la auto configuración).
First you should check, whether and which IPv6 addresses are already configured (perhaps auto-magically during auto-configuration).
7.1.1. Usando ip
Uso:
# /sbin/ip -6 route show [dev <device>]
Ejemplo:
# /sbin/ip -6 route show dev eth0 2001:0db8:0:f101::/64 proto kernel metric 256 mtu 1500 advmss 1440 fe80::/10 proto kernel metric 256 mtu 1500 advmss 1440 ff00::/8 proto kernel metric 256 mtu 1500 advmss 1440 default proto kernel metric 256 mtu 1500 advmss 1440
7.1.2. Usando route
Uso:
# /sbin/route -A inet6
Ejemplo (la salida está filtrada con la interfaz eth0). Aquí se pueden ver diferentes rutas IPv6 para diferentes direcciones en una misma interfaz.
Example (output is filtered for interface eth0). Here you see different IPv6 routes for different addresses on a single interface.
# /sbin/route -A inet6 |grep -w "eth0" 2001:0db8:0:f101 ::/64 :: UA 256 0 0 eth0 <- Interface route for global ¬ address fe80::/10 :: UA 256 0 0 eth0 <- Interface route for link-local ¬ address ff00::/8 :: UA 256 0 0 eth0 <- Interface route for all multicast ¬ addresses ::/0 :: UDA 256 0 0 eth0 <- Automatic default route
